Hours / Directions  •   Toll Free (844) NWC 0192      Local (651) 229 0192  •   info@northwestcanoe.com  

Four Stages of Canoe Building

SET-UP - This part takes general carpentry skills and tools - hammer, square, saw, and drill. It starts with the construction of a sturdy ladder-like beam called a strong back. During set up the canoe builder transforms flat paper plans into three dimensions. Each line on the canoe plans represents a building form, forms attach to the strong back. Twenty hours or more pass between buildding the strongback and laying the first cedar strip is laid on the building forms.

STRIPPING - Cedar strips laid onto building forms transform fishbone skeleton into solid object. Using the Minnesota Method, the canoe builder uses staples and square cut strips. The first strip follows the sheerline. The second touches the first at the center form. In a few hours an experienced canoe builder establishes a rhythm and closes in a large area of the hull. Battles rage-on over the topic of building with staples vs. stapless; using bead & cove strips vs. square cut strips... it comes down to aesthetics and personal preference.

LAMINATING - Meticulous preparation. Several hours pass fairing and sanding the hull in preparation for laminating. The wise builder then rehearses; cutting and dry fitting cloth, laying out spreaders, brushes and scissors. Pantomime steps. How much time for each movement?

While 6-oz. fiberglass is the most used fabric by cedar strip canoe builders, some use Kevlar, carbon or polyester fabrics for enhancing strength, abrasion resistance or visual drama. Once the canoe builder laminates the exterior of the hull, the boat comes off the building forms and the builder invests a day or two preparing and laminating the hull interior.

FINISHING - The fourth and final milestone involves gunwales, seats and thwarts. Finish trim serves two functions: first, gunwales, and cross members provide structure, a naked hull will twist and flex; second, trim makes the canoe usable, a comfortable place to sit or kneel, a means of portaging the canoe to water.

The builder anxious to get on the water can purchase pre-milled gunwales and ready made canoe seats; one day and the canoe is ready to paddle. The builder looking for a shop project can burn an entire day hand-crafting a single canoe seat.

Does NWC offer Classes / Worshops?

Education, sharing our canoe building know-how and techniques with you has always been one of the foundations of NorthWest Canoe.  To help you grasp the canoe building process and get on with handcrafting a canoe at home, we frequently fire up the ShopCam. Visit the NWC YouTube Channel for more ShopCam video.Or go to our Facebook page and click the photos tab for more canoe shop shenanigans. Visit the shop in person or call, we're glad to answer customer quesitons. Currentlly, we do not have any workshops secheduled.

Common Sense Canoe Building

Gather ten canoe builders in the same space and you get ten best methods to build a cedar strip canoe. You'd expect this amount of shop logic to provide definitive guidance. The quest for clarification often yields a confusing jumble of opinions and approaches to crafting a canoe.

A handful of Minnesota racers pioneered rib-less cedar strip canoe building in the '50's. Their innovation soon attracted average paddlers looking for a canoe they could craft at home, an alternative to heavier and utilitarian options of the day. We promote this Minnesota Method. Start by choosing a proven hull design that fits your paddling style, then use time-efficient building techniques to complete an aesthetically pleasing canoe.

Wood-art rafter ornaments are not NorthWest Canoe. We estimate one out of four first time builders gets overwhelmed and frustrated with too much shop logic; the canoe never gets finished. Canoe building is fun. Make building your canoe an escape from the stress and time-pressures of your daily routine. Finish your canoe ... then get out and paddle!

Canoe Cradles

Half way through building your canoe, you'll need a pair of sturdy canoe cradles. After laminating the exterior, the hull is stable. Remove the building forms and rest the canoe right side up in cradles to sand and laminate the interior. (Click image for canoe cradle plans)
click image for canoe cradle plans

We use this canoe cradle for building and repairs at the St Paul shop. Any handy guy or gal can knock a set together in an afternoon with three eight foot 2x6's and hand tools.

This design allows turning the hull eye-to-the-sky or bottom's up. The rope 'n peg adjustment lets you position the hull at a comfortable working height either way. Vary the width of the cross member and you can build cradles for a kayak or freighter canoe.

Build canoe cradles at the start, make it part of your set-up process along with the strongback and cutting forms.


Canoe Home   •    Shop NWC Store   •    Build My Canoe   •    NWC North Canoe   •    Canoe Repair   •    Paddle Escape   •    Policies

©2006-2016 Northwest Canoe Company, Saint Paul, Minnesota